1 image
Gym Gear
Platinum Series Multi Press
1 image
A 3-in-1 selectorised press for flat, incline and overhead pressing, with a 91 kg stack in 5 lb steps, 183 × 148 cm. Gym Gear's height figures disagree.
Listed version: SKU GG-PLAT-103
Price band: Over £2,000 on Gym Gear's own page, checked .
£3849 at Fytique.
Check the seller's page for the current price and availability.
We earn a commission from purchases made through these links. As an Amazon Associate I earn from qualifying purchases. Learn more
Updated
Overview
Specification-based profile. We have not tested this product hands-on and do not give it a review score. How we research.
Gym Gear describes chest, incline and shoulder press options in one machine, oversized multi-position handgrips, a patented 3-linkage seat adjustment, a cable and belt drive, 5 lb stack increments and EN957 certification. The spec sheet lists a 91 kg stack and L 183 × W 148 cm.
The text calls it a low-profile 1492 mm frame while the block and sheet give H 167 cm, so both heights are shown. Weight 287.6 kg and frame weight 91 kg appear in both. No user limit is published.
Key information
- Brand
- Gym Gear
- Category
- Strength Machines
- Retailer link
- Available
- Last updated
- 20 Oct 2026
Specifications
From the manufacturer specification, except where a retailer observation or calculation is identified. Unresolved differences are listed below.
Machine
- Machine type
- Selectorised (pin-loaded) machine
- Movements
- Chest press, Shoulder pressMaker: chest, incline and shoulder press.
- Plate system
- Not applicableWeight stack, not plate-loaded.
Size
- Length
- 1.83 mL 183 cm (block and sheet).
- Width
- 1.48 mW 148 cm (block and sheet).
- Height
- Sources disagree: 1.492 m (Product page and spec sheet text: low-profile 1492 mm frame), 1.67 m (the page's Size & Spec block and spec sheet: H 167 cm)
- Machine mass
- 287.6 kgthe page's Size & Spec block and spec sheet 'Weight'; frame weight 91 kg is listed separately.
Load claims
- Maximum user weight
- Not published
- Brand's load limit
- Not applicableWeight-stack machine; the 91 kg stack is in the rows.
- What the load limit covers
- Brand doesn't say
- Brand's load for each part
- Not applicable
- Warranty
- Not published
Other details
- Identity match
- Fytique and maker SKU GG-PLAT-103
- Weight stack
- 91 kg, 5 lb increments
- Safety standard
- EN957 (maker statement)
Pros & cons
Pros
- Three pressing angles.
- Stack increment stated.
Cons
- Height figures disagree.
- No user limit.
Who it's for
A good fit if
- Chest and shoulder pressing from one commercial machine.
Look elsewhere if
- Low ceilings until the height conflict is resolved.
Alternatives
Gym Gear
Pro Series Multi Press
Ad: affiliate linkView at Fytique(opens Fytique in a new tab)
We earn a commission from purchases made through these links. As an Amazon Associate I earn from qualifying purchases. Learn more
Sources & checks
Checked 14 Oct 2026. Manufacturer specifications are claims, not independent test results. Retailer listings can change. What the specification labels mean.
Before ordering
- Identity: Fytique variant SKU GG-PLAT-103 equals the gymgear.com variant SKU; name and gallery agree with the maker's. Neither side publishes a separate barcode.
- Batch 46 (12 October 2026) failed this listing only for doubtful small placard figures; re-decided under listing-image-rule 1.2.
- Spec sheet read: maker 'Download Spec' PDF. The 5 lb increment stays in the maker's unit.
- 22 October 2026: the selected approved merchant variant was available with its purchase button enabled. Checkout and postcode delivery were not tested; availability can change.
- Listing image check, 22 October 2026: all 4 distinct gallery/description photographs and the complete rendered product section were checked by eye. Shared neutral delivery/payment icons also pass. No failing people or figures; related recommendations and navigation excluded.
Platinum Series Multi Press