Loading…
Independent home-gym research · UK
Comparisons
Each list checks one rule against brand specifications. Not ranked: photographed products first, then by name, with where to buy each.
Shop by equipment
Every product in one table per type, with brand specifications side by side and where to buy each.
Guides
Tap a question for the short answer, the guide behind it and a shortlist to shop from.
The short answer
Your bar will fit if the section between its sleeves is wider than the outside edges of the installed J-cups. You also need enough space at both ends to load plates and attach collars.
Mirafit M3 20 kg: 220 cm long, 131 cm between the sleeves
What you’ll check
The short answer
Check that the hole in each plate fits the sleeves—the ends of the bar where the plates are loaded. Then make sure your full stack of plates still leaves enough room for the collars.
Mirafit M3 20 kg: 28 mm shaft, 50 mm sleeves
What you’ll check
The short answer
Choose a power cage if you want to lift inside a frame with an approved safety system around you. A squat rack is usually more open and compact, but its protection varies, so check the exact structure, safety equipment and anchoring requirements.
What you’ll check
The short answer
There is no single clearance that suits every rack. Measure the full setup in use—including the bar, bench and attachments—then allow room to load plates, move safely and follow the manufacturer’s minimum clearances.
What you’ll check
The short answer
There is no standard room size: it depends on the equipment and exercises you choose. Measure each item while it is being used, then check the room’s clear length, width, height and delivery route.
Rogue Ohio Bar: 86.75 in, about 2.20 m long
What you’ll check
The short answer
A bench’s load rating may include both your body weight and the weights you are lifting. Check the instructions for the exact model, including any separate user limit and whether the rating applies to every bench position.
Mirafit M150: 260 kg, user and weights combined
What you’ll check
The short answer
Confirm the exact model, its condition and history, and whether every essential part is included. Also check for recalls and add collection, servicing and replacement parts to the true cost before paying.
What you’ll check
The short answer
Choose iron plates if cost and saving sleeve space matter most; choose bumper plates if your training involves dropping the bar. In either case, check that the plates fit your bar—and only drop them if the plates, bar and flooring are all designed for it.
IWF rules: 45 cm diameter for discs of 10 kg and above
What you’ll check
